Tron protector

Tron protector

1. Remove balls and raise the playfield to the service position.
2. Locate the scoop and disconnect the 2 pin wire connector of the switch (green and white wires).
3. Remove the 2 pan head screws and 1 nylon locking nut holding the scoop in place and remove the scoop  from the machine.
4. Mount the protector in position being sure to press fit it tighly against the walls of the hole.
5. Use 2 pan head screws to mount the protector to the playfield.
6. Remount the scoop.
7. Reconnect switch connector.
8. Lower the playfield, return the balls to the trough and play.
9. Should look like this when done!